服务项目 |
794认证 |
面向地区 |
全国 |
车载终端。
1.车载终端产品完整设计文件；
2.送样型号的中文使用说明书；
3.车载终端产品出厂检测合格证；
4.车载终端产品入网设置及操作说明；
5.同一型号检测样品不少于5套找深圳航天检测机构。
车载终端。
1.车载终端标准符合性技术审查申请书；
2.营业执照、中国国家强制性产品认证证书（3C证书：其中申请检测的车载终端型号与证书保持一致）；
3.检测报告。
（二）平台。
1.系统平台标准符合性技术审查申请书；
2.营业执照;道路运输企业自建非经营性企业监控平台须提供道路运输经营许可证。
3.检测报告。
第十四条通信信息中心自收到申请材料之日起5个工作日内做出是否受理的决定。不予受理的，应书面告知，并说明理由。
第十五条通信信息中心对申请单位提交的资料按照本规范等有关要求进行资质审核。
在审核过程中发现检测数据不完整或阶段性结论不正确、不符合标准要求的，中止资质审核并告知申请单位。
在审核过程中发现检测报告存在问题的，可要求原检测机构进行整改，直至原检测机构或第三方检测机构出具复检或补充报告。检测机构有义务免费承担车载终端和平台的复
检工作。
在部公示前20个工作日未提交完整的审核资料的申请单位，顺延至下批次进行资质审核。
审核合格的，汇总报交通运输部。
针对客车规划出一套合理的客车处理方案。比如每到过年或其它一些严重假期的时分，客运流量就敏捷攀升，在这个时分，车主为了多挣钱，而旅客也急着回家或出游，不少客车呈现了超载现象；而通GPS，它能够对客车完结监控，它能够搭配摄像头（二路以上摄像头），将车内的各种情况以图片传输的方式传到管理中心，然后完结客车的无线监控。而一旦发现客车存在这样一个超载事实，就能够立刻下达长途指挥指令，能够对它立刻就能够对驾驶员进行指挥，并且能够完结长途锁车，这样一系列流程下来，能够处理客车超载这一难题。
经过以上的行动，便能够有用杜绝客车超载的问题，这个也是国家要求客车设备GPS的一个严重原因。国标GPS，客车GPS国家规范。究竟，客车超载，不仅是对司机不负责任，也是对车所有乘客不负责任的一个体现。国家规范客车GPS监控进步所有人的责任意识。
在客车管理中，还存在着客车超速这一难题，
JT/T794-2019交通部认证产品长途客车GPS行进记录仪
专心交通部794/808认证 欢迎致电或下方留言咨询
After the platform software developers and GPS equipment developers have installed the standard development, they need to pass the Ministry of Transportation’s Ministry of Transport’s Ministry of Standards inspection and certification, and then they can participate in the software and hardware bidding in various places.
The function test of the platform by the Ministry of Transport mainly simulates the GPS terminal sending standard protocol data, and then tests whether it can receive the data correctly. Developers of GPS applications must understand and master these protocols. The platform protocols are mainly JT/TB808, 809 and extended supplementary protocols. At the same time, the protocol also applies the ministry-promulgated GB19056 standard for the driving recorder. /T796 is mainly a standard for hardware equipment, you can refer to it.
JTT 808-2019 road transport vehicle satellite positioning system terminal communication protocol and data format
GB/T35658 Technical requirements for the platform of the road transport vehicle satellite positioning system
JTT 794-2019-Beidou compatible vehicle terminal technical specification for road transport vehicle satellite positioning system
JTT 809-2019 Road Transport Vehicle Satellite Positioning System-Platform Data Exchange
Whether developing GPS equipment hardware or developing application software, we have to face a standard. This standard is the certification standard of road transport vehicle satellite positioning system issued by the Ministry of communications. It covers the parameters and function standards of GPS hardware equipment, the protocol standard of equipment uploading to application platform, and the technology of platform to platform interconnection and mutual transmission Standards. That is to say, all the application platform software developed according to the standard of the Ministry of communications can access the upload data sent by the GPS equipment which meets the national standard developed by different manufacturers. Because the protocol is the same, the platform can also forward the data to the transportation management center of provincial transportation department. At present, for buses and dangerous goods transport vehicles that need to be on the road, two passengers and one danger for short, it is required to install GPS in line with the national standard. If the transport carrier does not have its own software platform, it can use the client software of the Transportation Management Bureau and access to the transportation management center for monitoring. The charging is also a burden for enterprises. Now the national standard for GPS terminal equipment has been further extended, which requires that the reader with fingerprint and other identification must be added, and the cost is not low. After the platform software developers and GPS equipment developers install the standards, they need to pass the Ministry of transportation's detection and certification. Only after obtaining the Ministry's certification can they participate in the bidding of software and hardware. The function test of the platform by the Ministry of communications is mainly to simulate the GPS terminal sending standard protocol data, and then test whether the data can be correctly received. GPS application developers must understand and master these protocols. The platform protocols mainly include JT / tb808, 809 and extended supplementary protocols. At the same time, the protocol also applies the GB 19056 standard issued by the Ministry for the dash cam part. Therefore, all these should be seen. JT / t796 is mainly the standard of hardware equipment, which can be referred to.
部标794认证办理难度大不大?
答:新版的交通部运输行业标准其实比原先的老标准还更加严格，增加了不少检测项目。部标794认证主要会测试产品的硬件和软件，也别是软件方面，如果你的产品软件功能不能满足要求的话，那么肯定是过不了这个认证的啊。有些企业送检了大半年都没有通过的我经常听到这样的例子的。所以，部标794过检的难度挺大的。
部标794认证过检周期需要多久？
如果是我们操作的话。一般是2个月左右可以申请完成取得报告，这个也是因人而异！如果企业有特殊情况需要加急的话，可以找航天检测技术中心张小姐了解下加急的情况的！
如果还有其他问题794认证的问题想了解怎么办？
欢迎大家多多交流，找航天检测张小姐吧！新版的794认证资料我这里有，可以发你一份去看看！
